| NO. | UNIT | ITEM | DESCRIPTION | REMARK |
| 1 |
Electrical specification
| Each unit of whole line | Total power: Fixed type 13.5HP | |
| Working voltage:AC380V |
| Frequency:50Hz |
| Control voltage:AC220V |
| Panel switch:DC24V. |
| 2 |
Energy Supply
| Power source | Max power 11KW | |
| Air pressure source | 6Kg/Cm2 |
| 3 | Feeding unit |
fork mechanism: feeding by manual
| Hydraulic control | |
| Designed by 4 forks, adjust for various sheet discharging. |
| Fork mechanism apply for flexible joint design, it is safety. |
| Apply for linear slide rail system |
| Operation mode: auto(display screen set),semi auto, manual control mode(panel operation) |
| 4 |
Main machine
|
Machine moving
| Button is motor-driven combine/separate control |
It can fit with printing machine for on-line control(printing machine back, whole line back).
|
| Limit switch protect stroke |
| Manual and automatic control setting |
| Main panel control system | Machine parts control panel, automatic function selecting of each unit |
It can fit with printing machine on-line control (alarming, feeding, speed adjusting)..
|
| Machine interface data setting, control by manual/auto |
|
Conveyor belt motor
| Main machine speed adjusted by converter |
It can fit with printing machine on-line control
|
| Belt width:200mm |
| Manual and automatic control setting |
| Hydraulic system | Apply semi-open type, the effect of heat dispelling better, easy to maintenance. | |
| working platform | Position by operation side | |
| 5 |
Convey system
|
Fixing arm
| Hydraulic system button control for manual and automatic lifting and down. |
It can fit with printing machine on-line
|
| With liquid valve, more safety |
|
Front control pane
| Manual control fixing arm lifting and down, extension arm stretch-out, machine moving. | |
| Back plate: manual and automatic control. |
| main belt speed: manual and automatic control(printing machine on-line control) |
| Slope plate | Touch display screen: large/small size mode control | |
| Side support roll | Adjust manual | |
| Back plate | Pneumatic cylinder working, squaring the sheet, never damage. | |
| Pneumatic cylinder stroke is 150mm |
| Manual and automatic control |
| Side baffle | Display screen: stretch in/out control |
It can fit with touch and display screen
|
| apply for linear slide rail system |
|
Front baffle for imbricated type
| Electronic button control stretch in /out |
It can fit with touch and display screen
|
| apply for linear slide rail system |
| height angle can be adjusted |
| 6 |
Electrical control system
|
Electrical control configuration
| PLC,control mold | YONG HONG(TAIWAN) |
| Converter, small relay | FU SHI(TAIWAN) |
| Small braker, limit switch | JAPAN OMON |
| Power supplier | MING FEI(TAIWAN) |
| Touch screen | PINTONG(TAIWAN) |
| Control transformer | SHUN LIANG(TAIWAN) |
| Air switch | FRENCH |
| Switch,button, lamp | CHINA |
| optoelectronic switch | TAIWAN |
| Motor, reducer | TAIWAN |
| Dust stop control panel | CHINA |
|
Display & touch screen
| Main hydraulic machine can save energy, start control type |
Can meet customers requirement to add some functions
|
| Convey system control |
| Printer paper stack height(lower/middle/higher) |
| Side baffle: moving control and adjust |
| Intelligence system | Speed synchronous control | |
| 7 | Hydraulic system | System Configuration | ODP,motor:7.5HP | TAIWAN |
| Metering pump | CHINA |
| Electronic control valve(solenoid valve) | TAIWAN |
| Solenoid directional valve, pilot operated check valve | TAIWAN |
| Check valve | TAIWAN |
| Oil cooler | TAIWAN |
| Oil tank (dipping inside, baking outside). | TAIWAN |
| Hydraulic cylinder, other accessories. | TAIWAN |
| 8 |
Other
|
hardware parts
| Linear slide rail | TAIWAN(HINI) |
| Bearing | NSK-JAPAN |
| Configurations, accessories and brand may be change without prior notice! |
